PLDT MyDSL SpeedSurf 504AN: Port Forwarding

1. Select Service Tab, under that select Firewall.
2. Select Virtual Server.
3. Enter your preferred User Defined Service Name.(e.g. CCTV)
4. Select Protocol.
5. Select Any for Wan Interface.
6. Enter WAN Port(DVR default Port or any port you want).
7. Enter LAN Port(DVR default Port or any port you want).
8. Enter DVR IP Address.
9. Click Apply Changes.
10. Click Save on the lower left side.
11. Select Admin, Commit Changes then Reboot.

PLDT MyDSL SpeedSurf 504AN: Demilitarized Zone (DMZ)

1. Enter 192.168.1.1 in the url address bar, then enter.
2. Enter adminpldt and 1234567890 for username and password, respectively.
3. Select Service, under that select Firewall.
4. Select DMZ Setting.
5. Select Enable DMZ, then enter the IP Address of the device you want to access in the internet.
6. Apply Changes.
7. Click Save on the lower left side.
8. Select Admin, Commit Changes then Reboot.

PLDT MyDSL Prolink H5004N: DMZ and DDNS Settings

DMZ Settings:

1. Type the local IP address of the router. (192.168.1.1)
2. Enter adminpldt and 1234567890, as username and password, respectively.
3. Go to Advanced select Router features.
4. Select DMZ and click Enable.
5. Enter the device local IP address.
6. Click Apply changes.

DDNS Settings:

1. Go to Advanced select Router features.
2. Select DDNS and click Enable.
3. Select DDNS Provider.
4. Enter Hostname, Username and Password for your device.
5. Click Add.
6. Go to Advanced again, select Admin.
7. Click Save and Reboot. 

D-Link DIR-524: DMZ and Dynamic DNS Settings

Type 192.168.0.1 in the URL Address. When prompt with Login Username and Password, enter admin for username, just leave the password field blank.

DMZ Settings:

1. Go to Advanced, on the left pane select DMZ.
2. Select Enabled to enable DMZ, then enter IP Address of the device you want to access in the Net.
3. Click Apply.

Dynamic DNS Settings:

1. Go to Tools, and on the left pane select Misc.
2. Enable DDNS.
3. On the Server Address, Enter your DDNS provider.
4. On the Host Name, Enter the hostname  you created in your DDNS provider for your device.
5. Type in your DDNS User Name.
6. Type in your DDNS Password.
7. Click Apply.

BayanDSL ZTE ZXV10 W300: DMZ and DDNS Settings

Type 192.168.1.1 in the URL address, when prompt with Username and Password. Enter admin and bayandsl, respectively.

DMZ Setting:

1. Go to Advanced Setup, and Disable SPI Firewall.
2. Select NAT and click DMZ.
3. Enable DMZ Setting.
4. Enter the IP Address of the device you want to access in the Net.
5. Click Save.

DDNS Setting:

1. Go to Access Management.
2. Select DDNS.
3. Activate DDNS Setting.
4. Enter your DNS Hostname, Username, and Password.
5. Click Save 

 

Billion BiGuard 10 iBusiness Security Gateway Small-office: DMZ and Dynamic DNS Settings

DMZ Settings:

1. In the URL address, type 192.168.1.254.
2. Type in username: admin and password: admin, then click Login.(The Web Manager opens on the Status menu.)
3. On the left pane, click Configuration.
4. Select Virtual Server.
5. Enable DMZ Function.
6. Enter IP Address of the device you want to be visible to the outside world.
7. Click Apply and Save Config.

Dynamic DNS Settings:

1. Click Configuration.
2. Select Advanced - Dynamic DNS.
3. Click Enable.
4. Select Dynamic DNS Server.
5. Enter Domain Name, Username and Password.
6. Apply and Save Config.
7. Click Restart to save current settings.

Cisco WRV210 Wireless-G VPN Router Booster: DMZ and DDNS Settings

Type 192.168.1.1 in the URL address. When prompt with username and password, enter 'admin' respectively without quotes.

DMZ Settings:

1. Go to Firewall.
2. Click DMZ, select Enabled.
3. Enter the IP address of the device you want to access in the internet.
4. Save.

DDNS Settings:

1. Go to Setup.
2. Click DDNS.
3. Enable and Select your DDNS service provider.
4. Enter username, password and hostname.Wait until you see that your ddns has updated successfully.
5. Save.

Cisco WRV210 Wireless-G VPN Router Booster

PLDT myDSL ZXV10 W300: DMZ and DDNS Settings

For Demilitarized Zone (DMZ):

1. Type 192.168.1.1 in the URL address
2. Enter adminpldt and 1234567890, as username and password respectively.
3. Go to Advance Setup, click NAT.
4. Click DMZ,  select Enable then enter your device IP address in DMZ Host IP Address.
5. Click Save.

For DDNS Setting:

1. Go to Access Management.
2. Click DDNS
3. Select Activated to Enable Dynamic DNS.
4. Enter hostname, username and password  of your dyndns account for your dvr.
5. Click Save.

Motorola WiMax CPEi25725: DMZ and Port Forwarding

If you are using Motorola WiMax CPEi25725 modem, your default gateway is probably 192.168.15.1. Now, here are the steps on how to Port Forward on you modem.

1. Open a browser, type 192.168.15.1 on the url address bar.
2. Type motorola for password.
3. On the upper right side, click Port Forwarding.
4. If you only have one device behind the router, use DMZ or else, click Forwarding for you to add devices.
5. For DMZ, Type in the IP address of the device you want to access from the internet. 
6. Click Apply.
7. For Forwarding, Click radio button for Select.
8. Choose TCP.
9. Enter Start - End WAN Port.
10. Enter IP Address.
11. Enter Start - End LAN Port.
12. Click Enabled.
13. Click Add, and then Apply to save your configurations.

How to access PLDT MyDSL HG530 DMZ settings?

If you are using PLDT MyDSL HG530 Modem, your default gateway should be 192.168.1.1.

1. Enter 192.168.1.1 on the address bar, when prompt with login. use username: adminpldt, password: 1234567890
2. On the left pane, click Basic, under that choose NAT.
3. click on DMZ, enter the IP address you would want to access in WAN.
4. click submit.

To make sure that your entry has been saved, try to restart the modem and access the dmz settings again.

How to access Advance Settings and DMZ in ZXDSL 831ii modem?

1. Type 192.168.1.1 in the address bar
2. When prompt with username and password. Use 'admin' and 'bayandsl', respectively without the qoute. 
3. Go to Advance, in the left pane click NAT.
4. Click DMZ, choose Enable.
5. Enter the IP Address of the device you want to access in the internet.
6. Click Save.

To make sure your entries has been saved, Reboot the modem and access it again.

CCTV Remote Viewing: Network testing and troubleshooting

Your done with dvr setup and configured router port forwarding and dmz(Demilitarized Zone). We now have to test your network. try to ping your dvr (e.g. ping 192.168.2.10), if you are able to ping it, then thats great, you have done it well locally. now for the host (e.g. mydvr.dyndns.org), tell a friend to try to ping your web ip address or your hostname. if he's able to ping them, your network is propery configured. But if not, try to see if you already configured the dmz or port forwarding of your router.

Here are few other reasons your service may not resolve correctly:

    * Typo: The simplest and most common problem is a typo. Double- and triple-check your spelling to make sure you are not transposing a letter or putting the wrong TLD (e.g. .net instead of .org).
    * Service is still in cart: Dynamic DNS hosts are placed in your shopping cart when you click the Create Host button. You must complete checkout to activate the hosts.
    * Service has not been created: When a new account is created, it does not contain any hosts. You need to add a hostname to begin using the service.

click HERE for the complete link of troubleshooting your network.