PLDT MyDSL Prolink H5004N: DMZ and DDNS Settings

DMZ Settings:

1. Type the local IP address of the router. (192.168.1.1)
2. Enter adminpldt and 1234567890, as username and password, respectively.
3. Go to Advanced select Router features.
4. Select DMZ and click Enable.
5. Enter the device local IP address.
6. Click Apply changes.

DDNS Settings:

1. Go to Advanced select Router features.
2. Select DDNS and click Enable.
3. Select DDNS Provider.
4. Enter Hostname, Username and Password for your device.
5. Click Add.
6. Go to Advanced again, select Admin.
7. Click Save and Reboot. 

How To Configure Two DVRs in 1 Router?

When configuring 2 dvrs in a router, you have to take note of certain Settings.

1. What will be the IP addresses of the dvr's.
2. What will be their Port?
3. Does your router supports Port Forwarding?

Now, if you are using 192.168.0.10 on dvr1, you should used assign different IP Address on the dvr2.

• dvr1 IP Address: 192.168.0.10

• dvr2 IP Address: 192.168.0.11

Now in the DVR Network configuration assign Port 81 for DVR1, and Port 82 for the other.To Port Forward, Go to your router look for Port Forwarding, enter the IP Address and the corresponding Port. To locally access your dvr in the browser, do this.

• 192.168.0.10:81

• 192.168.1.11:82

If you are using Dynamic DNS, you can access your dvr on the Net using,

• mydvr.dyndns.org:81

• mydvr.dyndns.org:82

D-Link DIR-524: DMZ and Dynamic DNS Settings

Type 192.168.0.1 in the URL Address. When prompt with Login Username and Password, enter admin for username, just leave the password field blank.

DMZ Settings:

1. Go to Advanced, on the left pane select DMZ.
2. Select Enabled to enable DMZ, then enter IP Address of the device you want to access in the Net.
3. Click Apply.

Dynamic DNS Settings:

1. Go to Tools, and on the left pane select Misc.
2. Enable DDNS.
3. On the Server Address, Enter your DDNS provider.
4. On the Host Name, Enter the hostname  you created in your DDNS provider for your device.
5. Type in your DDNS User Name.
6. Type in your DDNS Password.
7. Click Apply.

BayanDSL ZTE ZXV10 W300: DMZ and DDNS Settings

Type 192.168.1.1 in the URL address, when prompt with Username and Password. Enter admin and bayandsl, respectively.

DMZ Setting:

1. Go to Advanced Setup, and Disable SPI Firewall.
2. Select NAT and click DMZ.
3. Enable DMZ Setting.
4. Enter the IP Address of the device you want to access in the Net.
5. Click Save.

DDNS Setting:

1. Go to Access Management.
2. Select DDNS.
3. Activate DDNS Setting.
4. Enter your DNS Hostname, Username, and Password.
5. Click Save 

 

Billion BiGuard 10 iBusiness Security Gateway Small-office: DMZ and Dynamic DNS Settings

DMZ Settings:

1. In the URL address, type 192.168.1.254.
2. Type in username: admin and password: admin, then click Login.(The Web Manager opens on the Status menu.)
3. On the left pane, click Configuration.
4. Select Virtual Server.
5. Enable DMZ Function.
6. Enter IP Address of the device you want to be visible to the outside world.
7. Click Apply and Save Config.

Dynamic DNS Settings:

1. Click Configuration.
2. Select Advanced - Dynamic DNS.
3. Click Enable.
4. Select Dynamic DNS Server.
5. Enter Domain Name, Username and Password.
6. Apply and Save Config.
7. Click Restart to save current settings.

Cisco WRV210 Wireless-G VPN Router Booster: DMZ and DDNS Settings

Type 192.168.1.1 in the URL address. When prompt with username and password, enter 'admin' respectively without quotes.

DMZ Settings:

1. Go to Firewall.
2. Click DMZ, select Enabled.
3. Enter the IP address of the device you want to access in the internet.
4. Save.

DDNS Settings:

1. Go to Setup.
2. Click DDNS.
3. Enable and Select your DDNS service provider.
4. Enter username, password and hostname.Wait until you see that your ddns has updated successfully.
5. Save.

Cisco WRV210 Wireless-G VPN Router Booster

Linksys WRT54G2: DMZ and DDNS Settings

DMZ Settings:

1. Click Applications and Gaming then DMZ.
2. Select Enable and enter the IP address of the device you want to access in WAN.
3. Click Save Settings.

DDNS Settings:

1.  On Setup, select DDNS.
2. Enable DDNS Service.
3. Select your Dynamic DNS provider.(e.g. Dyndns.org)
   
4. Enter username, password and hostname, respectively. (make sure you have already created hostname for your device, for it to update successfully.)
   
5. Click Save.

PLDT myDSL ZXV10 W300: DMZ and DDNS Settings

For Demilitarized Zone (DMZ):

1. Type 192.168.1.1 in the URL address
2. Enter adminpldt and 1234567890, as username and password respectively.
3. Go to Advance Setup, click NAT.
4. Click DMZ,  select Enable then enter your device IP address in DMZ Host IP Address.
5. Click Save.

For DDNS Setting:

1. Go to Access Management.
2. Click DDNS
3. Select Activated to Enable Dynamic DNS.
4. Enter hostname, username and password  of your dyndns account for your dvr.
5. Click Save.