DLink DAP-1360: Access Point Configuration

Overview: The Wireless N Access Point (DAP-1360) enables you to create a new wireless network or simply extend your existing wireless network coverage.Though, it uses several different modes, we will be tackling more on Access Point configuration in this topic.

Configuration:

1. Connect Patch cord to the LAN Port of DAP-1360, and put the other end on your Laptop or Desktop.Or you can connect to it thru WiFi. You may have to temporarily set your IP Address to static. (e.g. 192.168.0.51)
2. Run a web browser, and type in the default IP address 192.168.0.50.
3. In the User Name field, type in the default name admin, Leave the password field blank.
4. Once you have logged in, click Wireless Setup in the left pane.
5. Select Access Point as the wireless mode.
6. Change the default Network Name (SSID) to your preferred name.
7. Disable the Auto Channel Selection if you want to change the default ( Channel 6) channel.
8. Go to Security , select you preferred security encryption and type in your password.
9. Click Save Settings. 

How to access Advance Settings and DMZ in ZXDSL 831ii modem?

1. Type 192.168.1.1 in the address bar
2. When prompt with username and password. Use 'admin' and 'bayandsl', respectively without the qoute. 
3. Go to Advance, in the left pane click NAT.
4. Click DMZ, choose Enable.
5. Enter the IP Address of the device you want to access in the internet.
6. Click Save.

To make sure your entries has been saved, Reboot the modem and access it again.

How to reset Epson C59/ME2/C79/CX3900?

Error: Parts Inside Your Printer Has Reached The End Of Its Service Life

1. Download First the resetter for Epson C59 here.
2. Unzip. Open the extracted folder.
3. Run INDORESET.BAT and follow the instruction.
4. Run adjprog.exe
5. Click Accept
6. Click Particular Adjustment Mode.
7. Go to Maintenance then Select Waste ink pad counter then click ok.
8. Click on "check button" till its done then click on "initialization button" then click on "finish button".
9. Switch off printer for 5secs then switch on again.
10. After you reset succesfully, go back in INDORESET.BAT windows and you can change the date back to normal.