PLDT MyDSL Prolink H5004N: DMZ and DDNS Settings

DMZ Settings:

1. Type the local IP address of the router. (192.168.1.1)
2. Enter adminpldt and 1234567890, as username and password, respectively.
3. Go to Advanced select Router features.
4. Select DMZ and click Enable.
5. Enter the device local IP address.
6. Click Apply changes.

DDNS Settings:

1. Go to Advanced select Router features.
2. Select DDNS and click Enable.
3. Select DDNS Provider.
4. Enter Hostname, Username and Password for your device.
5. Click Add.
6. Go to Advanced again, select Admin.
7. Click Save and Reboot. 

TP-Link Load Balance Router TL-R480T+: Remote Management

1. Open your web browser and type the private IP Address of the router in the URL field. (192.168.0.1)
2. Go to Maintenance→Admin Setup→Login Parameter.
3. Change the default Web Management Port for security and Web Idle Timeout so as not to log out after a specific period of inactivity.The Default Web Management Port is 80.
4. Go to Maintenance→Setup→Remote Management
5. Leave Subnet/Mask as it is, select activate then click Add.
6. Now, to access remotely if you're using Static IP, you should type “http://IP address:port” to login the Router. E.g.: If the Web Management Port is changed to 88, type http://IP address:88 in the address field to login the Router. But, if you're in a DHCP or Automatically Obtained IP address it is wise to use IP Updater like DynDNS for you to be able to use hostnames instead of IP addresses. E.g.: http://myrouter.dyndns.org:port