Saturday, December 10, 2011

Dlink DAP-1360: Repeater Mode Configuration

In Repeater mode, the DAP-1360 increases the range of your wireless network by extending the wireless coverage of another AP or wireless router. The APs and wireless router (if used) must be within range of each other. Make sure that all clients, APs, and the wireless router all use the same SSID (wireless network name), channel, and security settings.
Assuming that you will manually configure your dap-1360 as a repeater.
  1. Enter the Device Name of the AP and click next. (default is dlinkap).
  2. Select Repeater from the drop down menu.
  3. If you want to change the admin password, enter a new password and click next.
  4. Select Manual configuration to setup your network manually.
  5. Enter the Network name (SSID) of the network or you could use Site Survey to search for your wireless network you want to connect to.
  6. Find your access point from the list, and click connect.
  7. Choose which Security Mode you want to use.
  8. Enter your preferred wireless security password. click Next to complete the setup.
  9. Click finish.
You can also try to read, DLink DAP-1360: Access Point Configuration.