How to access Advance Settings and DMZ in ZXDSL 831ii modem?

1. Type 192.168.1.1 in the address bar
2. When prompt with username and password. Use 'admin' and 'bayandsl', respectively without the qoute. 
3. Go to Advance, in the left pane click NAT.
4. Click DMZ, choose Enable.
5. Enter the IP Address of the device you want to access in the internet.
6. Click Save.

To make sure your entries has been saved, Reboot the modem and access it again.

How to reset Epson C59/ME2/C79/CX3900?

Error: Parts Inside Your Printer Has Reached The End Of Its Service Life

1. Download First the resetter for Epson C59 here.
2. Unzip. Open the extracted folder.
3. Run INDORESET.BAT and follow the instruction.
4. Run adjprog.exe
5. Click Accept
6. Click Particular Adjustment Mode.
7. Go to Maintenance then Select Waste ink pad counter then click ok.
8. Click on "check button" till its done then click on "initialization button" then click on "finish button".
9. Switch off printer for 5secs then switch on again.
10. After you reset succesfully, go back in INDORESET.BAT windows and you can change the date back to normal.

Linksys WRT120N: How to block website?

Scenario:
In this scenario, management wants to block all social networking sites, porn sites and others. Only the 2 laptops used by the management should be able to access all the sites. first, what we did is we set all 30 client computers to static ip addresses (e.g. 192.168.1.1 to 192.168.1.30). Now for the router,

1. Go to Security - Firewall and then make sure SPI Firewall is enabled.
2. Enable NAT Filter Redirection.
3. Go to Access Restrictions - Internet Access 
• Select Policy Number from the drop-down menu.
• Enter a Policy Name in the field provided, and select Enabled.
• click Edit List ( this time, we enter the ip range of the PCs.192.168.1.1 - 30)
• and then click Save Settings.
• For Access Restrictions, choose allow.
• Decide which days and what times you want this policy to be enforced.
• Enter each URL in a separate Website Blocking by URL Address field, for specific URL addresses
• Enter each keyword in a separate Website Blocking by keyword field, for blocking website using specific keyword.
• click Save Settings to save the policy's settings. 

How to setup access point routers using your Wi-Tribe modem?

Want to share your internet access to others using your Wi-Tribe 4G and yet enjoying wi-fi connectivity? Here is a tutorial on how to setup routers for your wi-tribe.We will use your router as an access point for the wi-tribe modem.In this setup, The wi-tribe will be the one to provide ip addresses and the router will be used as a wireless connection point.Thus, if you have to port forward any ip address, you have to put it on the Port Forward setting of your modem.

1. First, configure your router.Setup all the settings needed.Like, Wireless Settings(SSID, Wireless Channel) and Wireless Security(Pass-key).
2. Disable Use Router as DHCP Server in LAN Setup if you are using Neatgear JWNR2000. Now, in this portion, disabling dhcp server depends on your router.Like, for DLink DIR-600, you just have to enable Access Point Mode and thats it.
3. For other routers, Read your routers' manual on how to disable dhcp server or to have them as access points.
4. Connect the patch cable of your modem to any of the Four(4) Ports of the router.and if you are wired, just connect your cable to other three ports that was left and wait until you are connected.

EagleEyes:Remote View of CCTV Surveillance Camera using Mobile phones and Laptops

We discussed on our past post about dvr network configuration, that you were be able to view your cctv surveillance camera on your mobile phones, though we did not include the software you have to use. Here, we will show you how to install and configure EagleEyes. Takenote that this are applicable for some dvr's. But first, you should create an account.

Now, if you already have an account, go to AVtech EagleEyes site again.

1. Click on Software.(Leftside of your screen)
2. Under that, choose your mobile OS.(e.g. if your using iphone choose iphone and/or choose android if you are using Android OS, Ipad for Ipads, Blackberry for Blackberry phones, Symbian for Nokia Phones, Win Mobile for Phones that uses Windows Mobile, Video Viewer for Windows laptop or MacBooks and more.)
3. On the center, click Download. if you're not logged in, they will look for your id and password. so just enter them.
4. After downloading, install the program and just follow what are configuration instructions for each softwares.
   
   Here is the complete instruction in installation and configuration of  EagleEyes.click here.