Dlink DAP-1360: Repeater Mode Configuration

In Repeater mode, the DAP-1360 increases the range of your wireless network by extending the wireless coverage of another AP or wireless router. The APs and wireless router (if used) must be within range of each other. Make sure that all clients, APs, and the wireless router all use the same SSID (wireless network name), channel, and security settings.

Assuming that you will manually configure your dap-1360 as a repeater.

1. Enter the Device Name of the AP and click next. (default is dlinkap).
2. Select Repeater from the drop down menu.
3. If you want to change the admin password, enter a new password and click next.
4. Select Manual configuration to setup your network manually.
5. Enter the Network name (SSID) of the network or you could use Site Survey to search for your wireless network you want to connect to.
6. Find your access point from the list, and click connect.
7. Choose which Security Mode you want to use.
8. Enter your preferred wireless security password. click Next to complete the setup.
9. Click finish.

You can also try to read, DLink DAP-1360: Access Point Configuration. 

DLink DAP-1360: Access Point Configuration

Overview: The Wireless N Access Point (DAP-1360) enables you to create a new wireless network or simply extend your existing wireless network coverage.Though, it uses several different modes, we will be tackling more on Access Point configuration in this topic.

Configuration:

1. Connect Patch cord to the LAN Port of DAP-1360, and put the other end on your Laptop or Desktop.Or you can connect to it thru WiFi. You may have to temporarily set your IP Address to static. (e.g. 192.168.0.51)
2. Run a web browser, and type in the default IP address 192.168.0.50.
3. In the User Name field, type in the default name admin, Leave the password field blank.
4. Once you have logged in, click Wireless Setup in the left pane.
5. Select Access Point as the wireless mode.
6. Change the default Network Name (SSID) to your preferred name.
7. Disable the Auto Channel Selection if you want to change the default ( Channel 6) channel.
8. Go to Security , select you preferred security encryption and type in your password.
9. Click Save Settings. 

How to setup access point routers using your Wi-Tribe modem?

Want to share your internet access to others using your Wi-Tribe 4G and yet enjoying wi-fi connectivity? Here is a tutorial on how to setup routers for your wi-tribe.We will use your router as an access point for the wi-tribe modem.In this setup, The wi-tribe will be the one to provide ip addresses and the router will be used as a wireless connection point.Thus, if you have to port forward any ip address, you have to put it on the Port Forward setting of your modem.

1. First, configure your router.Setup all the settings needed.Like, Wireless Settings(SSID, Wireless Channel) and Wireless Security(Pass-key).
2. Disable Use Router as DHCP Server in LAN Setup if you are using Neatgear JWNR2000. Now, in this portion, disabling dhcp server depends on your router.Like, for DLink DIR-600, you just have to enable Access Point Mode and thats it.
3. For other routers, Read your routers' manual on how to disable dhcp server or to have them as access points.
4. Connect the patch cable of your modem to any of the Four(4) Ports of the router.and if you are wired, just connect your cable to other three ports that was left and wait until you are connected.