PLDT MyDSL SpeedSurf 504AN: Port Forwarding

1. Select Service Tab, under that select Firewall.
2. Select Virtual Server.
3. Enter your preferred User Defined Service Name.(e.g. CCTV)
4. Select Protocol.
5. Select Any for Wan Interface.
6. Enter WAN Port(DVR default Port or any port you want).
7. Enter LAN Port(DVR default Port or any port you want).
8. Enter DVR IP Address.
9. Click Apply Changes.
10. Click Save on the lower left side.
11. Select Admin, Commit Changes then Reboot.

PLDT MyDSL SpeedSurf 504AN: How To Change Default Wifi Password

1. Enter 192.168.1.1 in the url address bar, then enter.
2. Enter adminpldt and 1234567890 for username and password, respectively.
3. Click Network Tab, select WLAN Menu.
4. On the Left Pane, select Security.
5. Change the default password then Enter your preferred Pre-Shared Key, then Apply.
6. Click Save.
7. Select Admin, Commit Changes then Reboot.

PLDT MyDSL SpeedSurf 504AN: Demilitarized Zone (DMZ)

1. Enter 192.168.1.1 in the url address bar, then enter.
2. Enter adminpldt and 1234567890 for username and password, respectively.
3. Select Service, under that select Firewall.
4. Select DMZ Setting.
5. Select Enable DMZ, then enter the IP Address of the device you want to access in the internet.
6. Apply Changes.
7. Click Save on the lower left side.
8. Select Admin, Commit Changes then Reboot.

PLDT MyDSL Prolink H5004N: DMZ and DDNS Settings

DMZ Settings:

1. Type the local IP address of the router. (192.168.1.1)
2. Enter adminpldt and 1234567890, as username and password, respectively.
3. Go to Advanced select Router features.
4. Select DMZ and click Enable.
5. Enter the device local IP address.
6. Click Apply changes.

DDNS Settings:

1. Go to Advanced select Router features.
2. Select DDNS and click Enable.
3. Select DDNS Provider.
4. Enter Hostname, Username and Password for your device.
5. Click Add.
6. Go to Advanced again, select Admin.
7. Click Save and Reboot. 

BayanDSL ZTE ZXV10 W300: DMZ and DDNS Settings

Type 192.168.1.1 in the URL address, when prompt with Username and Password. Enter admin and bayandsl, respectively.

DMZ Setting:

1. Go to Advanced Setup, and Disable SPI Firewall.
2. Select NAT and click DMZ.
3. Enable DMZ Setting.
4. Enter the IP Address of the device you want to access in the Net.
5. Click Save.

DDNS Setting:

1. Go to Access Management.
2. Select DDNS.
3. Activate DDNS Setting.
4. Enter your DNS Hostname, Username, and Password.
5. Click Save 

 

PLDT myDSL ZXV10 W300: DMZ and DDNS Settings

For Demilitarized Zone (DMZ):

1. Type 192.168.1.1 in the URL address
2. Enter adminpldt and 1234567890, as username and password respectively.
3. Go to Advance Setup, click NAT.
4. Click DMZ,  select Enable then enter your device IP address in DMZ Host IP Address.
5. Click Save.

For DDNS Setting:

1. Go to Access Management.
2. Click DDNS
3. Select Activated to Enable Dynamic DNS.
4. Enter hostname, username and password  of your dyndns account for your dvr.
5. Click Save.