Motorola WiMax CPEi25725: DMZ and Port Forwarding

If you are using Motorola WiMax CPEi25725 modem, your default gateway is probably 192.168.15.1. Now, here are the steps on how to Port Forward on you modem.

1. Open a browser, type 192.168.15.1 on the url address bar.
2. Type motorola for password.
3. On the upper right side, click Port Forwarding.
4. If you only have one device behind the router, use DMZ or else, click Forwarding for you to add devices.
5. For DMZ, Type in the IP address of the device you want to access from the internet. 
6. Click Apply.
7. For Forwarding, Click radio button for Select.
8. Choose TCP.
9. Enter Start - End WAN Port.
10. Enter IP Address.
11. Enter Start - End LAN Port.
12. Click Enabled.
13. Click Add, and then Apply to save your configurations.

How to access PLDT MyDSL HG530 DMZ settings?

If you are using PLDT MyDSL HG530 Modem, your default gateway should be 192.168.1.1.

1. Enter 192.168.1.1 on the address bar, when prompt with login. use username: adminpldt, password: 1234567890
2. On the left pane, click Basic, under that choose NAT.
3. click on DMZ, enter the IP address you would want to access in WAN.
4. click submit.

To make sure that your entry has been saved, try to restart the modem and access the dmz settings again.

Dlink DAP-1360: Repeater Mode Configuration

In Repeater mode, the DAP-1360 increases the range of your wireless network by extending the wireless coverage of another AP or wireless router. The APs and wireless router (if used) must be within range of each other. Make sure that all clients, APs, and the wireless router all use the same SSID (wireless network name), channel, and security settings.

Assuming that you will manually configure your dap-1360 as a repeater.

1. Enter the Device Name of the AP and click next. (default is dlinkap).
2. Select Repeater from the drop down menu.
3. If you want to change the admin password, enter a new password and click next.
4. Select Manual configuration to setup your network manually.
5. Enter the Network name (SSID) of the network or you could use Site Survey to search for your wireless network you want to connect to.
6. Find your access point from the list, and click connect.
7. Choose which Security Mode you want to use.
8. Enter your preferred wireless security password. click Next to complete the setup.
9. Click finish.

You can also try to read, DLink DAP-1360: Access Point Configuration. 

DLink DAP-1360: Access Point Configuration

Overview: The Wireless N Access Point (DAP-1360) enables you to create a new wireless network or simply extend your existing wireless network coverage.Though, it uses several different modes, we will be tackling more on Access Point configuration in this topic.

Configuration:

1. Connect Patch cord to the LAN Port of DAP-1360, and put the other end on your Laptop or Desktop.Or you can connect to it thru WiFi. You may have to temporarily set your IP Address to static. (e.g. 192.168.0.51)
2. Run a web browser, and type in the default IP address 192.168.0.50.
3. In the User Name field, type in the default name admin, Leave the password field blank.
4. Once you have logged in, click Wireless Setup in the left pane.
5. Select Access Point as the wireless mode.
6. Change the default Network Name (SSID) to your preferred name.
7. Disable the Auto Channel Selection if you want to change the default ( Channel 6) channel.
8. Go to Security , select you preferred security encryption and type in your password.
9. Click Save Settings. 

How to access Advance Settings and DMZ in ZXDSL 831ii modem?

1. Type 192.168.1.1 in the address bar
2. When prompt with username and password. Use 'admin' and 'bayandsl', respectively without the qoute. 
3. Go to Advance, in the left pane click NAT.
4. Click DMZ, choose Enable.
5. Enter the IP Address of the device you want to access in the internet.
6. Click Save.

To make sure your entries has been saved, Reboot the modem and access it again.