Huawei B683: How to set your Wifi Name(SSID) and Password.

1. Enter 192.168.1.1 in the url address bar, then enter.
2. Enter admin and admin for username and password, respectively.
3. Click Settings, select WLAN.
4. Enter your preferred Wifi Name(SSID) for your router.
5. Enter preferred wifi password in WPA Pre-shared Key textbox.
6. Click Apply.

PLDT MyDSL SpeedSurf 504AN: Port Forwarding

1. Select Service Tab, under that select Firewall.
2. Select Virtual Server.
3. Enter your preferred User Defined Service Name.(e.g. CCTV)
4. Select Protocol.
5. Select Any for Wan Interface.
6. Enter WAN Port(DVR default Port or any port you want).
7. Enter LAN Port(DVR default Port or any port you want).
8. Enter DVR IP Address.
9. Click Apply Changes.
10. Click Save on the lower left side.
11. Select Admin, Commit Changes then Reboot.

PLDT MyDSL SpeedSurf 504AN: How To Change Default Wifi Password

1. Enter 192.168.1.1 in the url address bar, then enter.
2. Enter adminpldt and 1234567890 for username and password, respectively.
3. Click Network Tab, select WLAN Menu.
4. On the Left Pane, select Security.
5. Change the default password then Enter your preferred Pre-Shared Key, then Apply.
6. Click Save.
7. Select Admin, Commit Changes then Reboot.

PLDT MyDSL SpeedSurf 504AN: Demilitarized Zone (DMZ)

1. Enter 192.168.1.1 in the url address bar, then enter.
2. Enter adminpldt and 1234567890 for username and password, respectively.
3. Select Service, under that select Firewall.
4. Select DMZ Setting.
5. Select Enable DMZ, then enter the IP Address of the device you want to access in the internet.
6. Apply Changes.
7. Click Save on the lower left side.
8. Select Admin, Commit Changes then Reboot.

PLDT Zyxel P-600 Series: Port Forwarding

1. Type in  the local IP Address of the Modem in the address bar (192.168.1.1).
2. Enter 1234 for password.
3. Go to Advanced Setup
4. Select NAT
5. In SUA Only, click Edit Details.
6. Enter Port Number of the device in the Start Port and End Port. 
7. Enter the IP Address of the device and then click Save.

PLDT MyDSL Prolink H5004N: DMZ and DDNS Settings

DMZ Settings:

1. Type the local IP address of the router. (192.168.1.1)
2. Enter adminpldt and 1234567890, as username and password, respectively.
3. Go to Advanced select Router features.
4. Select DMZ and click Enable.
5. Enter the device local IP address.
6. Click Apply changes.

DDNS Settings:

1. Go to Advanced select Router features.
2. Select DDNS and click Enable.
3. Select DDNS Provider.
4. Enter Hostname, Username and Password for your device.
5. Click Add.
6. Go to Advanced again, select Admin.
7. Click Save and Reboot. 

TP-Link Load Balance Router TL-R480T+: Remote Management

1. Open your web browser and type the private IP Address of the router in the URL field. (192.168.0.1)
2. Go to Maintenance→Admin Setup→Login Parameter.
3. Change the default Web Management Port for security and Web Idle Timeout so as not to log out after a specific period of inactivity.The Default Web Management Port is 80.
4. Go to Maintenance→Setup→Remote Management
5. Leave Subnet/Mask as it is, select activate then click Add.
6. Now, to access remotely if you're using Static IP, you should type “http://IP address:port” to login the Router. E.g.: If the Web Management Port is changed to 88, type http://IP address:88 in the address field to login the Router. But, if you're in a DHCP or Automatically Obtained IP address it is wise to use IP Updater like DynDNS for you to be able to use hostnames instead of IP addresses. E.g.: http://myrouter.dyndns.org:port

How To Configure Two DVRs in 1 Router?

When configuring 2 dvrs in a router, you have to take note of certain Settings.

1. What will be the IP addresses of the dvr's.
2. What will be their Port?
3. Does your router supports Port Forwarding?

Now, if you are using 192.168.0.10 on dvr1, you should used assign different IP Address on the dvr2.

• dvr1 IP Address: 192.168.0.10

• dvr2 IP Address: 192.168.0.11

Now in the DVR Network configuration assign Port 81 for DVR1, and Port 82 for the other.To Port Forward, Go to your router look for Port Forwarding, enter the IP Address and the corresponding Port. To locally access your dvr in the browser, do this.

• 192.168.0.10:81

• 192.168.1.11:82

If you are using Dynamic DNS, you can access your dvr on the Net using,

• mydvr.dyndns.org:81

• mydvr.dyndns.org:82

D-Link DIR-524: DMZ and Dynamic DNS Settings

Type 192.168.0.1 in the URL Address. When prompt with Login Username and Password, enter admin for username, just leave the password field blank.

DMZ Settings:

1. Go to Advanced, on the left pane select DMZ.
2. Select Enabled to enable DMZ, then enter IP Address of the device you want to access in the Net.
3. Click Apply.

Dynamic DNS Settings:

1. Go to Tools, and on the left pane select Misc.
2. Enable DDNS.
3. On the Server Address, Enter your DDNS provider.
4. On the Host Name, Enter the hostname  you created in your DDNS provider for your device.
5. Type in your DDNS User Name.
6. Type in your DDNS Password.
7. Click Apply.

BayanDSL ZTE ZXV10 W300: DMZ and DDNS Settings

Type 192.168.1.1 in the URL address, when prompt with Username and Password. Enter admin and bayandsl, respectively.

DMZ Setting:

1. Go to Advanced Setup, and Disable SPI Firewall.
2. Select NAT and click DMZ.
3. Enable DMZ Setting.
4. Enter the IP Address of the device you want to access in the Net.
5. Click Save.

DDNS Setting:

1. Go to Access Management.
2. Select DDNS.
3. Activate DDNS Setting.
4. Enter your DNS Hostname, Username, and Password.
5. Click Save 

 

Billion BiGuard 10 iBusiness Security Gateway Small-office: DMZ and Dynamic DNS Settings

DMZ Settings:

1. In the URL address, type 192.168.1.254.
2. Type in username: admin and password: admin, then click Login.(The Web Manager opens on the Status menu.)
3. On the left pane, click Configuration.
4. Select Virtual Server.
5. Enable DMZ Function.
6. Enter IP Address of the device you want to be visible to the outside world.
7. Click Apply and Save Config.

Dynamic DNS Settings:

1. Click Configuration.
2. Select Advanced - Dynamic DNS.
3. Click Enable.
4. Select Dynamic DNS Server.
5. Enter Domain Name, Username and Password.
6. Apply and Save Config.
7. Click Restart to save current settings.

Epson FX-1170: How to Add Printer Driver in Windows 7

1. Make sure your Windows Update is enabled.
2. Go to Devices and Printers, Click Add Printer.
3. Select  Add a Local Printer
4. Select Printer port then click Next.(if you are not sure with what port you are using use LPT1)
5. If your Printer is not on the list yet, Click Windows Update.
6. Wait until updates are finish.(it takes a few minutes depending on your internet connectivity)
7. Select your Printer Model, then install.

Now, If all else fail try to Reformat your PC and do the Windows Update first. That may do the work.

Cisco WRV210 Wireless-G VPN Router Booster: DMZ and DDNS Settings

Type 192.168.1.1 in the URL address. When prompt with username and password, enter 'admin' respectively without quotes.

DMZ Settings:

1. Go to Firewall.
2. Click DMZ, select Enabled.
3. Enter the IP address of the device you want to access in the internet.
4. Save.

DDNS Settings:

1. Go to Setup.
2. Click DDNS.
3. Enable and Select your DDNS service provider.
4. Enter username, password and hostname.Wait until you see that your ddns has updated successfully.
5. Save.

Cisco WRV210 Wireless-G VPN Router Booster

Linksys WRT54G2: DMZ and DDNS Settings

DMZ Settings:

1. Click Applications and Gaming then DMZ.
2. Select Enable and enter the IP address of the device you want to access in WAN.
3. Click Save Settings.

DDNS Settings:

1.  On Setup, select DDNS.
2. Enable DDNS Service.
3. Select your Dynamic DNS provider.(e.g. Dyndns.org)
   
4. Enter username, password and hostname, respectively. (make sure you have already created hostname for your device, for it to update successfully.)
   
5. Click Save.

PLDT myDSL ZXV10 W300: DMZ and DDNS Settings

For Demilitarized Zone (DMZ):

1. Type 192.168.1.1 in the URL address
2. Enter adminpldt and 1234567890, as username and password respectively.
3. Go to Advance Setup, click NAT.
4. Click DMZ,  select Enable then enter your device IP address in DMZ Host IP Address.
5. Click Save.

For DDNS Setting:

1. Go to Access Management.
2. Click DDNS
3. Select Activated to Enable Dynamic DNS.
4. Enter hostname, username and password  of your dyndns account for your dvr.
5. Click Save.

Motorola WiMax CPEi25725: DMZ and Port Forwarding

If you are using Motorola WiMax CPEi25725 modem, your default gateway is probably 192.168.15.1. Now, here are the steps on how to Port Forward on you modem.

1. Open a browser, type 192.168.15.1 on the url address bar.
2. Type motorola for password.
3. On the upper right side, click Port Forwarding.
4. If you only have one device behind the router, use DMZ or else, click Forwarding for you to add devices.
5. For DMZ, Type in the IP address of the device you want to access from the internet. 
6. Click Apply.
7. For Forwarding, Click radio button for Select.
8. Choose TCP.
9. Enter Start - End WAN Port.
10. Enter IP Address.
11. Enter Start - End LAN Port.
12. Click Enabled.
13. Click Add, and then Apply to save your configurations.

How to access PLDT MyDSL HG530 DMZ settings?

If you are using PLDT MyDSL HG530 Modem, your default gateway should be 192.168.1.1.

1. Enter 192.168.1.1 on the address bar, when prompt with login. use username: adminpldt, password: 1234567890
2. On the left pane, click Basic, under that choose NAT.
3. click on DMZ, enter the IP address you would want to access in WAN.
4. click submit.

To make sure that your entry has been saved, try to restart the modem and access the dmz settings again.

Dlink DAP-1360: Repeater Mode Configuration

In Repeater mode, the DAP-1360 increases the range of your wireless network by extending the wireless coverage of another AP or wireless router. The APs and wireless router (if used) must be within range of each other. Make sure that all clients, APs, and the wireless router all use the same SSID (wireless network name), channel, and security settings.

Assuming that you will manually configure your dap-1360 as a repeater.

1. Enter the Device Name of the AP and click next. (default is dlinkap).
2. Select Repeater from the drop down menu.
3. If you want to change the admin password, enter a new password and click next.
4. Select Manual configuration to setup your network manually.
5. Enter the Network name (SSID) of the network or you could use Site Survey to search for your wireless network you want to connect to.
6. Find your access point from the list, and click connect.
7. Choose which Security Mode you want to use.
8. Enter your preferred wireless security password. click Next to complete the setup.
9. Click finish.

You can also try to read, DLink DAP-1360: Access Point Configuration. 

DLink DAP-1360: Access Point Configuration

Overview: The Wireless N Access Point (DAP-1360) enables you to create a new wireless network or simply extend your existing wireless network coverage.Though, it uses several different modes, we will be tackling more on Access Point configuration in this topic.

Configuration:

1. Connect Patch cord to the LAN Port of DAP-1360, and put the other end on your Laptop or Desktop.Or you can connect to it thru WiFi. You may have to temporarily set your IP Address to static. (e.g. 192.168.0.51)
2. Run a web browser, and type in the default IP address 192.168.0.50.
3. In the User Name field, type in the default name admin, Leave the password field blank.
4. Once you have logged in, click Wireless Setup in the left pane.
5. Select Access Point as the wireless mode.
6. Change the default Network Name (SSID) to your preferred name.
7. Disable the Auto Channel Selection if you want to change the default ( Channel 6) channel.
8. Go to Security , select you preferred security encryption and type in your password.
9. Click Save Settings. 

How to access Advance Settings and DMZ in ZXDSL 831ii modem?

1. Type 192.168.1.1 in the address bar
2. When prompt with username and password. Use 'admin' and 'bayandsl', respectively without the qoute. 
3. Go to Advance, in the left pane click NAT.
4. Click DMZ, choose Enable.
5. Enter the IP Address of the device you want to access in the internet.
6. Click Save.

To make sure your entries has been saved, Reboot the modem and access it again.